User's Manual
8
Hardware Installation
3.2. Debug Covers
3.2.1. Removing a Debug Cover
The top cover on the Sedona (41/43/45/47) can be removed as seen in the following sections.
Follow these steps to remove a top cover:
1. Locate the front panel to view the debug/USB cover.
2. Facing the cover, grasp the left end of the cover and rotate it out until it is angled and the
securing hook on the right side is no longer adhering to the bezel.
3. Slide the cover out and remove it.
)LJXUH 5HPRYLQJD'HEXJ&RYHU