Specifications

COMPANY CONFIDENTIAL
16
(3) DPR table by different Platform requirement
Refer the detail DPR table base on different platform requirement and implement into FW
setting
(Waiting customer provide)
Remark:
a. The platform (system) side needs design a proximity sensor connect to platform system
side, while the sensor be triggered then pull low the DPR pin to enable SAR power back off
mechanism
b. After DPR pin becomes low level, you can set the MAX TX power by AT commands.
1.5.9 USIM& eSIM
T
he UIM contains parameters necessary for the WWAN device’s operation in a wireless wide
area network radio environment. The UIM signals are described in the following paragraphs
for M.2 add-in cards that support the off-card UIM interface.
(1) 2 USIM interface
Design 2 USIM interface on M.2 connector; USIM _1 (Pin 30/32/34/36/66) dedicate for
external USIM socket; USIM_2 connect to on board e-SIM chip; Put Pin 40/42/44/46/48 as
NC and reserved for 2nd external USIM socket