Product Info

4. Remove the base cover assembly. See “Base cover assembly” on page 30.
5. Remove the M.2 solid-state drive:
a. Remove the screws that secure the M.2 solid-state drive bracket
1 and then remove the bracket 2 .
b. Carefully remove the drive out of the slot
3 .
6. Install a new M.2 solid-state drive:
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert
the drive into the slot at an angle of about 20 degrees
1 and pivot the M.2 solid-state drive
downward.
b. Place the M.2 solid-state drive bracket above the M.2 solid-state drive
2 , and then install the screws
to secure the M.2 solid-state drive bracket
3 .
32 User Guide