Specifications

COMPANY CONFIDENTIAL
- 3 -
Modification History
Rev Date Originator Comment
R1.0
2019/5/9 Lynn. Liu Initial release
R1.1 2019/5/20 Lynn. Liu Update base on the customer requirements
R1.2
2019/5/28 Lynn. Liu
Update item 2.4 for antenna requirements; item 1.4.2 for
USIM2
R1.3
2019/5/30 Lynn. Liu
Update Pin38/60 description and item 1.5.12 for
Coexistence
R1.4 2019/7/9 Lynn. Liu
1. Remove n25/38/40& B43 support due to Qualcomm
update (item1.1); 2. Remove n71& GPS L5 due to not in
POR and B48 as TBD; 3. Update mmWave IF connector
pin definition (item 2.4.2); 4. Update ME drawing (item3.2
R1.5 2019/7/25 Lynn. Liu
1. Update PCIe connection guideline(item1.5.4);
2. Update ME drawing (item3.2); 3. Update antenna
configuration (item 2.4.2); 4. Update LTE Rx sensitivity
Spec; 5. Update W_Disable# (item1.5.5)
R1.6 2019/9/12 Lynn. Liu
1. Update Pin29/31/35/37(USB3.0) to NC;
2. Need Platform side reserve USB2.0 for factory test
(WinPE) (item1.4.2)
R1.7 2019/10/08 Lynn. Liu
1. Disable B48 for NA (item 1); 2. Update operating
temperature (item 4.1); 3. Update antenna configuration
(item 2.4.2 Figure2-2); 4. Update golden plating drawing;
5. Pin29/31/35/37 as NC and reserve with PCIe Lane 2
R1.8 2020/2/24 Lynn. Liu
1. Remove mmW for Sub6G only SKU;
2. Enable B48 for
US& EU 3. Remove Reset (Pin67) requirement; 4.
Update antenna configure (Item 2.4.2 Figure2-2); 5.
Update HW feature (Item 2); 6. Update initial power
consumption Spec (Item 4.2); 7. Update RF performance
Spec (Item 5.1& 5.2) & support bandwidth; 8. Add DPS
feature
R1.9 2020/3/27 Lynn. Liu
1. Add PN for Olympic MLK& Andrews; 2. Disable B40 to
meet FCC requirement; 3. Update Power on/off
sequence requirement (Item 1.5.13); 4. Reserve 0.1uF
on Pin6(Full card power off) & Pin50 (PERST#) Item
1.5.3& 1.5.4; 5. Add n71 for new Platform POR