User Manual

4
5
PHYSICAL CHARACTERISTICS
Please read below before using your Command headlamp as it relays
beneficial operating and safety information.
P/N NAME WEIGHT
DIMENSIONS
(L x W x H)
410-L06
Command LoPro
(White)
8.4oz (238g)
Elastic Strap
9.8oz (278g)
Silicone Strap
5.3” x 0.7” 1.0”
(135 x 18 x 25mm)
410-T09
Command Tilt
(White)
4.8” x 1.0” 1.0”
(122 x 25 x 25mm)
420-L06
Command+ LoPro
(White & Green)
5.3” x 0.7” 1.0”
(135 x 18 x 25mm)
420-T06
Command+ Tilt
(White & Green)
4.8” x 1.0” 1.0”
(122 x 25 x 25mm)
420-T09
Command+ Tilt
(White)
420-T15
Command+ Tilt
(White & Amber)
COMMAND RECHARGEABLE
P/N NAME WEIGHT
DIMENSIONS
(L x W x H)
420-L06R
Command+ LoPro
(White & Green)
Rechargeable
8.4oz (238g)
Elastic Strap
9.8oz (278g)
Silicone Strap
5.3” x 0.7” 1.0”
(135 x 18 x 25 mm)
420-009RS
Command 20
Tasker S
Rechargeable
4.8” x 1.0” 1.0”
(120 x 25 x 25 mm)
WARNINGS
Do not stare into LEDs for long periods of time or from a close range of
less than 2ft (0.6m).
!
BATTERY
The Command Series requires four (4) AA batteries. Acceptable battery
types include: Alkaline or rechargeable Alkaline, rechargeable NiMH or
LiFeS
2
(all are 1.2 to 1.6 volts each).
Do not leave batteries in the Battery Pack for periods longer than three
(3) months without use.
Be sure to check the Battery Pack every month for battery corrosion.
NOTE: Corrosion from leaking batteries is NOT covered by the warranty.
NOTE: Mixing of new and used, or different brand batteries is not
recommended as this could lead to leakage or explosion.
BATTERY INSTALLATION
(WATCH THE VIDEO: FOXFURY.COM/VIDEOS)
1. Open all six (6) of the Battery Pack Tabs.
2. Insert four (4) AA batteries. Reference the plus (
+
) and minus (
-
) symbols
located on the inside of the Battery Pack for proper installation.
REASSEMBLING THE BATTERY PACK
1. Once batteries are installed, test the light’s performance by activating the
Power/Mode Switch located on the top of the light.
2. Secure the Battery Pack Cover by snapping all six (6) Battery Pack Tabs.
A ‘click’ should be heard as the snaps are shut.
NOTE: Make sure the Battery Pack is properly closed to maintain a
water tight seal.
1
1
1
2
2
2