User's Manual

Page | 13
operating with. For example, if you are playing sound 001 at volume 9, and
then switch to sound 002 at volume 5, by pressing the recall button you will
jump back to sound 001 and volume 9.
6.6 Volume Control
The TX9 provides you with 10 volume steps controlled by the volume up and
volume down arrow buttons. The volume level is displayed on the remote
control screen.
6.7 Timer
The elapsed timer allows you to see how long you have been on a stand. The
timer starts as soon as you turn on the TX9 transmitter. You can reset the timer
by pressing the Recall and P1 buttons simultaneously. The timer will
automatically reset to 00:00 if it is allowed to continue beyond the 99:99 mark.
6.8 Setting Presets P1 and P2
The TX9 allows you to have two presets. Each preset provides one button
access to your most frequently used sounds. To program a preset, perform the
following:
1. Press and hold P1 for 5 seconds. The top line of the TX9 display will
change to: “SEL SND/VOL PRESS P1”
2. Use the sound up/down arrow buttons to highlight the sound you wish
to have set on P1.
3. Use the volume up/down arrow buttons to set the volume level.
4. Press P1 a final time to lock in your preset.