User's Manual

V 10

S 16

V 15

S 16

This example shows that the volume is set to 10 for three loops playing sound

number 16. The volume then switches to level 15 and plays sound 16 one last

time.

After creating your sequence file in Notepad (or basic text editor), be sure to

name the file in the format of S00.seq through S09.seq so that the Prairie

Blaster will recognize it as a valid sequence file. Notepad will try to name the

file .txt by default; this must be changed to .seq. You can add a description to

the file title as in the following examples:

S00 Stand 1.seq S02 Bobcat Special.seq

S01 Stand 2.seq S03 Coyote.seq

Loading a Sound Sequence to Your Prairie Blaster Manually

In order to get the sound sequence file from your computer into your Prairie

Blaster, you will need to locate the USB cable provided with the unit. Remove

the battery compartment door on the Prairie Blaster and remove the battery

pack. Locate the USB port in the bottom of the battery compartment. Using the

USB cable, connect the Prairie Blaster to your computer. Take note to what

drive letter is being assigned to your Prairie Blaster. Copy the sequence files

from your hard drive directly into the drive letter of the Prairie Blaster.

Playing a Sequence

Sequences can be engaged at any time during operation.

1) Press the SEQUENCE button on the TX-500

2) Press a number button on the keypad to play the corresponding

sequence from 0 – 9 or highlight the desired sequence with the rotary

selector knob and depress it one time.

Play Modes and Sequences

If you have selected a different playback mode (i.e. jukebox or single)

sequence mode will ignore this selection.

6.8 SOUND PRESETS

The TX-500 provides you with quick access to your favorite sounds and