User's Manual

The Programming Utility is also stored on the Prairie Blaster memory card.
To download and install the Programming Utility from your PRAIRIE
BLASTER
1) Connect your Prairie Blaster to your PC with the supplied USB cable.
Once the PRAIRIE BLASTER is recognized by the PC it will be assigned
a drive letter.
2) Enter your “MY COMPUTER” icon and locate the PRAIRIE BLASTER
from the list of available drive letters. Once you have located the drive for
the PRAIRIE BLASTER, double-click on the icon to open it up.
3) After the drive is opened, locate the file named labelutil.exe and then refer
to steps 6 through 9 for installation of the Programming Utility.
8.3 PROGRAMMING WITH THE UTILITY
To gain access to the Prairie Blaster’s USB port
1) Remove the battery compartment door from the back side of the Prairie
Blaster and remove the batteries. The USB port will be accessible through
the bottom of the battery compartment.
2) Connect the provided USB cable between this port, and the USB port on
your computer. Once the connection is made, your computer should
recognize the PRAIRIE BLASTER as a removable drive.
Programming Process
1) Double click the folder on your desktop or go to your programs folder and
open the FOXPRO Programmer. You will be prompted to make a backup of
your sounds.
2) Select OK, you will then be taken to the programming utility.
3) Select the proper USB drive for the PRAIRIE BLASTER. This is marked as
Select Device, located in the upper right portion of the programming utility.
NOTE: This drive varies on different computers. Once you have
selected the drive, the list of sounds currently on your PRAIRIE
BLASTER appears in the right vertical window. You will now notice
that a new button appears above the Select Device window that
reads “Backup”. If you have not made a backup of your sounds,
simply click on this button. The programmer by default will backup
your sounds to a “FOXPRO” folder, and a sub folder “Backup”. This
is also a good folder to use to add new sounds prior to adding
sounds, or reprogramming your PRAIRIE BLASTER. You can also