User's Manual

5
2-3 Inferno Transmitter: First Glance
The following chart corresponds to a graphic
below that depicts the Inferno transmitter .
NUMBER
DESCRIPTION
1
Power On/Off
2
Select
3
Volume Up/Down
4
Mute
5
2 Quick Presets
6
Lanyard loop
7
Aux
iliary
8
User button
9
Sound/Menu Scroll Up/Down
10
Back/Menu
11
Stand Timer
12
Battery Indicator
13
Sound List Input Jack
14
Mute Indicator
15
Volume Level Indicator
16
FOXBANG Indicator
The Inferno transmitter operates on three AA
batteries. It is recommended that you use high
quality alkaline or lithium batteries. To install
batteries in the transmitter:
1. Access the battery compartment by removing the door from the back of the transmitter. The
door slides down and off of the transmitter.
2. Place the batteries into each battery cavity while observing polarity as indicated.
3. Slide the battery compartment door back on the transmitter.
Quick Start Guide
We realize that some of you may wish to jump directly into basic operations, such as playing sounds and
using presets. This is a very brief overview and it is strongly recommended that you read the manual in its
entirety to fully understand all of the capabilities of the system.
2-4 Playing Sounds
IMPORTANT NOTE
THE INFERNO
TRANSMITTER
IS NOT INTENDED TO
OPERATE THE CALLER AT DISTANCES
SHORTER THAN 1 METER (3 FEET). IF THE TRANSMITTER IS LOCATED TOO CLOSE TO THE
CALLER, PROPER OPERATION CANNOT BE ENSURED.