User's Manual

11
Automotive Diagnostic Scanner NT819BT User's Manual V1.0
Figure 2-2 Top View
③ Power Switch - turns on the scanner, goes to sleep mode or wake up the
scanner from sleep mode, press and hold for 3 seconds for emergency
shutdown..
④ USB Type-C Port - connects to wall plug to charge the scanner and can
be used for data transfer.
⑤
USB Port - provides a USB connection for the external storage devices,
oscilloscope or video scope etc.
IMPORTANT
Do not use solvents such as alcohol to clean display. Use a mild nonabrasive
detergent and a soft cotton cloth.
2.2 VCI Dongle Descriptions
NT819BT connects to the vehicle and get data through the VCI dongle either
by Bluetooth or USB communication.