User's Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- Safety Message Conventions Used
- Important Safety Instructions
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 Vehicle Identification
- 5 Diagnosis
- 6 Maintenance
- 6.1 Oil Light Reset
- 6.2 Electronic Parking Brake (EPB) Service
- 6.3 Battery Replacement (BRT)
- 6.4 Diesel Particulate Filter (DPF) Regeneration
- 6.5 Throttle Body Alignment (TPS/TBA)
- 6.6 Steering Angle Sensor (SAS) Calibration
- 6.7 Continuous Variable Transmission (CVT)
- 6.8 Gear Learning
- 6.9 Tire Pressure Monitoring System Programming
- 6.10 Odometer
- 6.11 Injector Coding
- 6.12 ABS Bleeding
- 6.13 Key Programming/Immobilizer
- 7 Data Manager
- 8 VCI Manager
- 9 Registration and Update
- 10 Settings
- 11 Shop Manager
- 12 My Account
- 13 Remote Support
- 14 Technical Data
17
Premier Diagnostic Platform NT909 User's Manual V1.01
Figure 3-2 Sample Bluetooth Communication Screen
Figure 3-3 Sample USB Communication Screen
Please refer to Chapter 3.3.1.1about the details of how to connect via
Bluetooth and Chapter 3.3.1.2 about the details of how to connect via
USB cable.
3. Check the VCI Indicator status at the toolbar. If the button turns to green,
the NT909 is ready to start vehicle diagnosis.
3.3.1 VCI Connection
The VCI dongle supports two ways of communication with the NT909 tablet:
● Bluetooth Communication
● USB Communication
3.3.1.1 Bluetooth Communication
Bluetooth communication is recommended. The working range for Bluetooth
communication is about 10-20m, providing easy connection to vehicles in any
location throughout the shop.