User's Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- Safety Message Conventions Used
- Important Safety Instructions
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 Vehicle Identification
- 5 Diagnosis
- 6 Maintenance
- 6.1 Oil Light Reset
- 6.2 Electronic Parking Brake (EPB) Service
- 6.3 Battery Replacement (BRT)
- 6.4 Diesel Particulate Filter (DPF) Regeneration
- 6.5 Throttle Body Alignment (TPS/TBA)
- 6.6 Steering Angle Sensor (SAS) Calibration
- 6.7 Continuous Variable Transmission (CVT)
- 6.8 Gear Learning
- 6.9 Tire Pressure Monitoring System Programming
- 6.10 Odometer
- 6.11 Injector Coding
- 6.12 ABS Bleeding
- 6.13 Key Programming/Immobilizer
- 7 Data Manager
- 8 VCI Manager
- 9 Registration and Update
- 10 Settings
- 11 Shop Manager
- 12 My Account
- 13 Remote Support
- 14 Technical Data
51
Premier Diagnostic Platform NT909 User's Manual V1.01
Figure 5-34 Sample Programming Screen
5.3.3 Hot Functions
It is designed for most common used functions like battery configuration, oil
light reset and provides quick access to service functions for the technicians.
To start a test:
1. Select Special Functions from main menu and press ENTER to confirm.
Figure 5-35 Sample Main Menu Screen
2. Select Hot Functions option from the Special Functions menu. A list of
available services display.
Figure 5-36 Sample Special Functions Screen
3. Select the function you want to test. Follow on-screen instructions to make
proper selections and operations to complete the tests