User Manual

14
Next Generation Diagnostic Platform GT60 User's Manual V1.01
Table 2-2 Technical Specifications
3 Getting Started
This section describes how to power on/down the scanner, provides brief
introductions of applications loaded on the scanner and display screen layout
of the scan tool.
3.1 Powering up the Scanner
Before using the GT60 applications (including updating the scanner), please
make sure to provide power to the scanner.
The unit operates on any of the following sources:
●
Internal Battery Pack
●
Vehicle Power
●
External Power Supply
Screen
7’’ diagonal, daylight readable color LCD screen; 1024*600 pixel
Operation System
Android 5.1
Processor
MT8163 (ARM Cortex, a53x4, 1.3GHz)
Memory
1GB DDR3L
SSD Hard drive
32GB
Communication
interface
Built-in WIFI 802.11 b/g Wireless LAN
USB2.0 OTG/standard USB 2.0 HOST
Bluetooth 4.0 (10-20 m)
Camera
5 megapixels rear-facing
Built-in Battery
4000mAh, Lithium-polymer battery, chargeable via 5V USB power
supply
Protocols
ISO9141-2, ISO14230-2, ISO15765-4, K/L lines, Double K Line
SAE-J1850 VPW,SAE-J1850PWM,CAN ISO 11898, High-speed,
Middle-speed, Lows-peed and Single wire CAN, KW81, KW82,
GM UART, UART Echo Byte Protocol, Honda Diag-H Protocol,
TP2.0, TP1.6, SAE J1939, SAE J1939, SAE J1708,Fault-Tolerant
CAN
Working Temperature
-10 to 70°C
Storage Temperature
-20 to 80°C
Operating Humidity
5%-95% Non-Condensing
Dimensions
205*135*30mm (L*W*H)
Weight
0.87kg (Main unit)