User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 Vehicle Identification
- 5 Diagnosis
- 6 Maintenance
- 6.1 Oil Light Reset
- 6.2 Electronic Parking Brake (EPB) Service
- 6.3 Battery Replacement (BRT)
- 6.4 Diesel Particulate Filter (DPF) Regeneration
- 6.5 Throttle Body Alignment (TPS/TBA)
- 6.6 Steering Angle Sensor (SAS) Calibration
- 6.7 Continuous Variable Transmission (CVT)
- 6.8 Gear Learning
- 6.9 Tire Pressure Monitoring System Programming
- 6.10 Odometer
- 6.11 Injector Coding
- 7 Data Manager
- 8 Firmware Update
- 9 Registration and Update
- 10 Settings
- 11 Shop Manager
- 12 My Account
- 13 Remote Support
- 14 Technical Data
21
Next Generation Diagnostic Platform GT60 User's Manual V1.01
Figure 4-3 Sample Automatic Read Screen
4. If it takes too long to get the VIN code, press Cancel to stop and input the
VIN manually. Or if failed to identify the VIN, please input the VIN manually
or click Cancel to quit.
Figure 4-4 Sample Manual Entry Screen
4.1.2 Scan VIN
Scan VIN allows identifying a vehicle by scanning the VIN plate of the vehicle,
barcode, QR code or photo recognition.
4.1.2.1 Scan VIN Plate
To identify a vehicle by Scan VIN Plate:
1. Select Diagnostic from home screen of the GT60 application.
2. Click VIN button and choose Scan VIN from the option list.
3. Find the VIN plate of your car, and put the VIN number into the scanning
box. The VIN number displays with a successful scan. If the Vehicle
Specification or VIN code is correct, press the Confirm to continue. If
incorrect, you are allowed to modify VIN number manually.