User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 Vehicle Identification
- 5 Diagnosis
- 6 Maintenance
- 6.1 Oil Light Reset
- 6.2 Electronic Parking Brake (EPB) Service
- 6.3 Battery Replacement (BRT)
- 6.4 Diesel Particulate Filter (DPF) Regeneration
- 6.5 Throttle Body Alignment (TPS/TBA)
- 6.6 Steering Angle Sensor (SAS) Calibration
- 6.7 Continuous Variable Transmission (CVT)
- 6.8 Gear Learning
- 6.9 Tire Pressure Monitoring System Programming
- 6.10 Odometer
- 6.11 Injector Coding
- 7 Data Manager
- 8 Firmware Update
- 9 Registration and Update
- 10 Settings
- 11 Shop Manager
- 12 My Account
- 13 Remote Support
- 14 Technical Data
42
Next Generation Diagnostic Platform GT60 User's Manual V1.01
Figure 5-25 Sample Live Data Screen
6 Maintenance
This section gives brief instructions of the most commonly required service
and maintenance operations. Typical service operation screens are a series
of menu driven executive commands. Follow on-screen instructions to
complete the operation.
Available service and maintenance options include:
● Oil Light Reset
● EPB Service
● Battery Configuration
●
DPF Regeneration
●
TPS/TBA
●
SAS Calibration
● CVT
● Gear Learn
● TPMS Programming Service
●
Odometer
●
Injector coding
6.1 Oil Light Reset
Oil Light Reset menu allows you to reset the service lamps on the
instrument cluster. The Service Indicator System is designed to alert the
driver when the vehicle is due for a service.
Oil service reset methods are determined by the vehicle being tested.
Depending on the vehicle being tested, any of the following means displays:
●
Oil Reset with One Button - applicable to GM models only. It offers quick
and simple oil service reset with the click of one button.