User Instructions
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 Diagnostic Operations
- 5 Bi-directional Test Operations
- 6 Service and Maintenance Operations
- 7 Data Manager
- 8 Print Operations
- 9 Remote Control
- 10 Setting
- 11 About
- 12 Registration and Update
23
4.2 System Selection
When you have completed the identification of vehicle, a menu for selecting
system to test displays. Menu options typically include:
● Auto Scan
● Control Unit
4.2.1 Auto Scan
Auto Scan performs an automatic system test to determine which control
modules are installed on the vehicle and obtain diagnostic trouble codes
(DTCs) overview. Depending on the number of control modules, it may take a
few minutes to complete the test.
To perform an automatic system scan:
1.Press Auto Scan option to start.
Figure 4-19 Sample Select System Scan Screen
2.To pause the scan, press the Pause button on the screen.
Figure 4-20 Sample Auto System Scan Screen
3.At the end of successful automatic controller scan, a menu with a list of
installed controllers together with their DTC overview displays.