User Instructions
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 Diagnostic Operations
- 5 Bi-directional Test Operations
- 6 Service and Maintenance Operations
- 7 Data Manager
- 8 Print Operations
- 9 Remote Control
- 10 Setting
- 11 About
- 12 Registration and Update
25
5.When running auto scanning, you can click Pause and select the system
you would like to test. When the scanner has established connection with
the vehicle, the Function Menu displays.
Figure 4-24 Sample Function Menu screen
4.2.2 Control Unit
Control Unit screen displays all controllers available of the vehicle
manufacturer. The controllers listed on the menu do not mean that they are
installed on the vehicle. It is useful for technicians who are familiar with the
vehicle specifications.
To select a system for testing:
1.Press Control Unit from the menu and a controller menu displays.
Figure 4-25 Sample Control Unit Menu Screen
2.Select the system you would like to test. When the scanner has established
connection with the vehicle, the Function Menu displays.