User Instructions
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 Diagnostic Operations
- 5 Bi-directional Test Operations
- 6 Service and Maintenance Operations
- 7 Data Manager
- 8 Print Operations
- 9 Remote Control
- 10 Setting
- 11 About
- 12 Registration and Update
35
IMPORTANT
The tests activate a component, but they do not check if the component is
working correctly. Make sure the components to be tested are in good
condition and correctly mounted.
NOTE
Available tests depend on the control module under test and the vehicle itself.
To start a test:
1.Press Active Test from the menu and a list of available options displays.
Figure 5-1 Sample Active Test Screen
2.Select an option to start the test and live data of the selected test displays.
Figure 5-2 Sample Active Test Screen
3.Follow on-screen instructions to make proper selections and operations to
complete the tests.
4.To exit the test, tap the Back button or the Close button at the top right of
the screen.