User Instructions
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 Diagnostic Operations
- 5 Bi-directional Test Operations
- 6 Service and Maintenance Operations
- 7 Data Manager
- 8 Print Operations
- 9 Remote Control
- 10 Setting
- 11 About
- 12 Registration and Update
47
Figure 12-1 Sample Tool Information Screen
3.Press the Back button to exit.
12 Registration and Update
The scanner can be updated to keep you stay current with the latest
development of diagnosis. This section illustrates how to register and update
your scan tool. You can register both on Foxwell website or by the update
client Foxscanner.
To update your scanner, please follow the three steps here below:
1.Obtain a FOXWELL ID.
2. Register the product with the product serial number and product password.
3. Update the product by the update application FoxScanner.
To be able to use FoxScanner, PC or laptop must meet the following
minimum requirements:
● Operation System: Win98/NT, Win ME, Win2000, Win XP, VISTA and
Android 7 and Android 8.
● CPU: Intel PⅢ or better
● RAM: 64MB or better
● Hard Disk Space: 30MB or better
● Display: 800*600 pixel, 16 byte true color display or better
● Internet Explorer 4.0 or newer
NOTE
Before registration and updating, please make sure your network works
correctly.
12.1 Create a Foxwell ID
If you are new to FOXWELL, please register with FOXWELL and obtain a
FOXWELL ID first. There are two methods to register an ID.