User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 OBDII/EOBD Operations
- 5. DTC Lookup
- 6 Review Data
- 7 System Setup
- 8 Tool Information
- 9 NT Wonder Introduction
NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
17
Figure 4-15 Sample Custom Datastream Screen
4. When finished selection, press the ENTER key to display selected items.
Figure 4-16 Sample Datastream Screen
4.3.2 Record Data
The Record Data function is used to record PIDs to help diagnose intermittent drivability problems that
can’t be determined by any other method.
Menu options typically include:
● Complete Data
● Custom Data
● Unit of measure (Please refer to Chapter 7 Set Up)
NOTE
There are two types of trigger methods used.
●
Manual Trigger---triggers recording whenever operators press the ENTER key.
●
DTC trigger--- automatically triggers recording when a code is detected by vehicle. DTC Trigger
is not available on all vehicles. Some vehicles need to be driven for a long period of time to store
a code after a drivability fault occurs. If DTC trigger is selected to make a recording, there might
not be drastic change in the data before and after trigger.
Do not operate the code reader while driving; always have two persons in vehicle when recording – one
to drive and the other to operate the code reader.
To record data:
1. Select Record data from the menu and press the ENTER key.