User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 OBDII/EOBD Operations
- 5. DTC Lookup
- 6 Review Data
- 7 System Setup
- 8 Tool Information
- 9 NT Wonder Introduction
NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
27
Test results do not necessarily indicate a faulty component or system.
To request on-board monitor test results:
1. Use the UP/DOWN key to highlight On-Board Monitor Test from Diagnostic Menu and press
the ENTER key.
Figure 4-38 Sample Diagnostic Menu Screen
2. Depending on the protocol the vehicle used, one of these 2 screens shows.
Figure 4-39 Sample Non-CAN Vehicle Test Screen
Or
Figure 4-40 Sample CAN vehicle test screen
3. Use the UP/DOWN key to highlight a test group and press the ENTER key to confirm. A screen
with details of the selected sensor displays. Use the up and down arrow keys to scroll through
data to select lines, and left and right arrow keys to scroll back and forth through different
screens of data.
For non-CAN vehicles, test screen is illustrated as below: