User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 OBDII/EOBD Operations
- 5. DTC Lookup
- 6 Review Data
- 7 System Setup
- 8 Tool Information
- 9 NT Wonder Introduction
NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
36
Figure 7-4 Sample Configure Monitors Display
7.2.1 Spark IGN Required Monitors
In this menu, the operators can configure monitors for spark ignition cars (gasoline engines).
To configure spark IGN required monitors:
1. Use the UP/DOWN key to highlight Spark IGN Required Monitors from menu and press the
ENTER key to confirm.
2. The custom monitors selection screen displays.
Figure 7-5 Sample Custom Monitors Selection Screen
3. Use the RIGHT key to select or deselect a monitor or press the LEFT key to deselect all the
monitors. Press the ENTER key to confirm and BACK key to cancel.
Figure7-6 Sample Spark IGN Required Monitors Selection Screen
NOTE
The number to the upper right corner of display indicates the total number of optional monitors
and sequence of currently selected monitor.