User Manual
Table Of Contents
- One-Year Limited Warranty
- Safety Information
- 1 Using This Manual
- 2 Introduction
- 3 Getting Started
- 4 OBDII/EOBD Operations
- 5. DTC Lookup
- 6 Review Data
- 7 System Setup
- 8 Tool Information
- 9 NT Wonder Introduction
NT301 OBDII/EOBD Code Reader User’s Guide_English Version_V1.00
46
Figure 9-3 Sample Update Done Screen
9.2 Printing
The Print Data function is used to print test results through computer. It is not available to perform this
function when the device is in Update Mode.
To print test results:
1.Download and launch NT Wonder as instructed on page 44 of 9.1 Updating the Code Reader.
2.Activate the application by clicking the Print Button from the menu.
Figure 9-4 Sample Printing Activation Function
3.Connect NT301 to computer with the USB cable supplied to power it on.
4.Use the LEFT/RIGHT key to select Print Data from home screen of the NT301 and press the
ENTER key to confirm.
Figure 9-5 Sample Home Screen Function
5. Use the UP/DOWN key to select desired data to print. If all recorded data to be printed, use the
UP/DOWN key to select Print All Data.