Manualshelf

User Manual

ManualsBrandsFOXWELL ManualsAutomotiveNT510 Elite Bidirectional Scan Tool for Chrysler Dodge Jeep, Full System HVAC 4WD Obd2 Scanner with ABS Auto Bleed Battery Registeration TPMS EPB DPF Service Light Maintenance Functions etc
12345678910
9
NT510Elite Multi-System Scanner Manual_English_V1.01
2.2 Accessory Descriptions
This section lists the accessories that go with the scanner. If you find any of the following items missing
from your package, contact your local dealer for assistance.
1 User’s Guide - provides operation instructions for the usage of the scanner.
2 Diagnostic Cable - provides connection between the scanner and a vehicle.
3 USB Cable - provides connection between the scanner and a computer to update and print data.
4 Warranty Card - A warranty card is required if you need any repair or replacement from us.
5 Nylon Carry Pouch - stores the scanner and its accessories.
2.3 Technical Specifications
Display: Backlit, 240*320 TFT color display
Working Temperature: 0 to 60 ℃ (32 to 140℉) Storage
Temperature: -20 to 70℃ (-4 to 158℉)
Power Supply: 8-18V vehicle power and 3.3V USB power
Dimensions: (L*W*H): 200*100*38mm Weight:
0.6 Kg
3 Getting Started
This section describes how to provide power to the scanner, provides brief introductions of applications
loaded on the scanner and display screen layout and illustrates how to input text and numbers with the
scan tool.
3.1 Providing Power to Scanner
Before using the scanner, make sure to provide power to the scanner.
The unit operates on any of the following sources:
● 12-volt vehicle power
● USB connection to computer
3.1.1 Connecting to Vehicle Power
The scanner normally powers on whenever it is connected to the data link connector (DLC).
To connect to vehicle power:
1. Locate the data link connector (DLC). The DLC is generally located under the dash on the driver side
of the vehicle.
2. Attached the Diagnostic cable to the scanner and tighten the captive screws to ensure good
connection.
3. Connect a correct adapter to the data cable according to the vehicle being serviced and plug it into
the vehicle DLC.
4. Switch the ignition key to the ON position.
5. The scanner automatically boots up.
IMPORTANT
Never try to provide power for the scan tool from USB connection when the scan tool is communicating
with a vehicle.
3.1.2 Connecting to Computer with USB Cable
The scan tool also receives power through the USB port when it is connected to a computer for software
updates and printing of data. To connect to computer: