User's Manual

19
PTS1000 User's Manual V1.1
Figure 3-6 Sample Get The Activation Data Interface
3.1 Activation
3.1.1 Sensor Activation
According to the guidance of the activation interface, unplug the device and
activate the tire pressure sensor in the left front, right front, right rear, left rear,
and spare tire (if any) in turn from the left front wheel. The corresponding
indicator light of the selected tire will flash, and the power indicator light will
flash when the activation is in progress. After the activation is successful, the
corresponding tire indicator light will be on. After activating all tires, connect
the device to the computer again, click the "Read Activation Data" button of
the PTS1000 software, and the software will obtain the ID, pressure,
temperature, battery state and other related information of the activation
sensor.
Figure 3-7 Sample Get Tire Pressure Data Interface