Product Overview

Specifications
Appearance:
Dense, paste like consistency
and is light brown or tan in
color.
Contains:
Potassium Oleate, Propylene
Glycol and Mica. Contains NO
PETROLEUM. LubeFit
®
is not
manufactured with silicone in
its formula.
Packaging:
2lb (1-quart approx.)
55-gl drum
(400 lbs. approx.)
See Safety Data Sheet for
additional safety and disposal
information at www.fppi.com
CAUTION: Eye irritant.
Avoid contact with eyes.
Wash thoroughly after use.
Description
LubeFit
®
is a vegetable ber based lubricant for all gasketed ttings, including
grooved couplings for re sprinkler systems and all grades of EDPM gaskets. It
is non staining* and does not support bacterial growth. LubeFit
®
can be easily
applied in temperatures from -10°F to 150°F. LubeFit
®
is non-toxic and water
soluble. Under normal conditions, LubeFit
®
is not harmful to the skin.
Design Criteria/Data
• Water dispersible
• Applies equally well to wet or dry
surfaces
• Suitable for all types of pipe lines,
including potable water
• Excellent working range -10° to 150°
• Will not support bacteria
• Will not deteriorate natural or Synthetic
rubber, plastic gaskets or caston iron
pipe
• Certied to NSF/ANS/Std 61-G
Application
LubeFit
®
should be applied in an
even and thin amount over the parts
to be lubricated. Avoid applying
excessive amounts. The best
applicaion is achieved when applying
by hand. Clean all dirt, burrs and
foreign matter from the joint surfaces.
Make certain the gasket is properly
located. Apply an even coating of
lubricant to all tting surfaces and
gasket. Assemble the joint according
to the pipe tting manufacturer’s
directions.
Disclaimer
DO NOT ALTER THE CONSISTENCY OF THIS PRODUCT.
Use as is directly from the container. Keep away from your
mouth and eyes. If eye contact occurs, ush with water
for 5 minutes. If discomfort persists get medical attention.
*Will stain untreated porous surfaces such as concrete if
not cleaned from the surface immediately.
The information contained herein is produced in good
faith and is believed to be reliable but is provided for
guidance and information purposes only. FPPI and
its agents cannot assume liability or responsibility for
results obtained in the use or misuse of its product by
persons whose methods and qualications are outside
and beyond our control. It is the user’s responsibility to
determine the suitability of, methods of use, preparation
prior to use, and appropriate installation for all products
purchased from FPPI. It is the user’s sole responsibility to
observe and adapt such precautions as may be advisable
or necessary for the protection of personnel and property
in the handling and use of any of our products.
WWW.FPPI.COM
LubeFit
®
Gasket Lubricant
FBC
™
System Compatible
indicates that this product
has been tested, and is
monitored on an ongoing
basis, to assure its chemical
compatibility with FlowGuard
Gold
®
, BlazeMaster
®
and
Corzan
®
pipe and fittings.
FBC
™
, FlowGuard Gold
®
,
BlazeMaster
®
and Corzan
®
are licensed trademarks of
The Lubrizol Corporation or
its affiliates.
SMITH COOPER
COMMERCE, CA 90040
+ 1 [phone]
+ 1 [phone] FAX
© 2018 Fire Protection Products, Inc. FPPI
®
, LubeFit
®
are registered trademarks of Fire Protection Products, Inc.