Datasheet

48
INTRUSION Catalogue
INTRUSION Catalogue
Wired devices
Indoor volumetric detectors
Double technology detector DT1000AM
DT1000AM
Main characteristics
• Plane micro-wave section with pulsed emission (10,4GHz)
• Functioning in AND - OR – ANTI-MASKING
• Regulation of the micro-wave power
• Timer for blocking the micro-wave emission when
the system is off
• Anti-masking dedicated contact
• Led for alarm memory (and jumper for disabling), indicating
which technology has done the detection
Other characteristics
• Protection against opening and creep zone
• Digital technology with micro-processor
• It’s possible to install many detectors in the same place,
without using additional cables for the programmation
• Anti-masking dedicated contact, to differentiate the type
of alarm
• Adjustable bracket included with internal cable gland
• Infrared section: PIR 2 elements
• Coverage adjustable between 3 and 15 m.
• Volumetric Fresnel lens, 31 beams on 5 levels.
• “Walk test” function
• ABS box, wedge closing without using screws
• Temperature compensation
• RFI noise protectionI
DT1000AM is a double technology detector with anti-masking function managed
by micro-processor; the infrared section is made by one PIR with two elements
and a plane micro-wave section,10,4GHz.
It can be used in three different configurations: AND, the detector trigger an alarm
when both technology are simultaneously activated (high immunity to false
alarms); OR, the detector trigger an alarm when just one technology is activated;
ANTIMASKING: it detects, nearby the detectors, every attempt of masking the
micro-wave or the passive infra-red.
Item DT1000AM
code 999745
Coverage length m 15
width ° 90
Pyroelectric elements 2
Micro-wave type DRO
GHz 10,4
Micro-wave max power mW 10
Lens beams 31
levels 5
Alarm type AND - OR - ANTI-MASK
Temperature compensation availability Yes
Anti-opening availability Yes
Creep-zone protection availability Yes
Memory of alarms availability Yes
LED walk test availability Yes
Alarm contact mA, V, Ω 100, 40, 16
Tamper contact mA, V 40, 30
Protection RFI V/m, MHz 10, 20–1000
Power supply and consumption
Voltage V 9 – 15
Consumption mA 26
Characteristics
Housing material ABS
Dimensions (lxdxh) mm 110x60x46
Operating temperature °C +5 to +40
Weight g 0,122
Compliance CEI 79-2:1998+AB:2000 (1°lev.)
Adjustable
bracket included