LCD-17VGA (art. 918135) 17” TFT LCD MONITOR User’s Manual Thanks for purchasing our product. Before operating the unit, please read the instructions carefully and keep this manual for future reference.
Safety directions • • • • • Risk of electrical shock Do not open so as to reduce the risk of electrical shock Do not remove the back cover. There are no useful parts inside. The removal of the back cover makes the guarantee invalid. The LCD must only be repaired by qualified personnel. Warnings and precautions Do not put your hands or face or any object near the LCD ventilation opening.
Safety measurements SAFETY WARNINGS The product must be installed only by qualified persons, according to the local safety standards and regulations. It is classified as Class II, in accordance with EN 60950-1. Installation warnings - Use only the original power cable, installing the product so that the mains plug is easily accessible. - The product must not be exposed to dripping or splashing and thus it shall be installed indoors, in a dry place.
Monitor views You can use your video with the front panel keys.
Characteristics ★ Luminous image ★ Exact processing of color ★ Built-in amplifier and loudspeakers Components 1 LCD COLOR MONITOR 1 ACCESSORIES: FEEDER AND USER’S MANUAL Key instructions Up: Up arrow key on the OSD Down: Down arrow key on the OSD MENU Menu: enables the OSD menu Right : Increases the values on the menu and raises the volume Left : Decreases the values on the menu and lowers the volume SOU/AOU Sources: Changes the video input sources Power: switches the monitor ON
I/O Connectors: 1. VGA INPUT 2. PC Audio input 3. DC / 12V input OSD (On Screen Display) OSD (On Screen Display) menu enables user to manipulate the image and settings OSD main menu consists of source OSD Menu Contrast, Brightness, Gamma Correct, Color Adjust, , Exit of Color, H. Position, V. Position, Sharpness, Phase, Clock, Exit of Picture, Language, OSD H. Position, OSD V. Position, OSD Time, Exit of OSD, Reset, Volume, Exit of Miscellaneous, Exit.
Image: Auto Adjust: :This function will adjust the optimal parameters automatically. H. Position: :This function will provide user to adjust the horizontal position of display screen. Setting value from 0 ~ 200. Default value is 100. V. Position: :This function will provide user to adjust the vertical position of display screen. Setting value from 0 ~ 18. Default value is 9. Clock: :This function will provide user to adjust the clock of display screen. Setting value from 0 ~ 100. Default value is 50.
Applicable Timing VGA Synchronization The VGA synchronization can be of 14 modes that are saved in the memory Analog RGB Input port Support for Sync-on-Green (SOG) Auto Detection/Auto calibration Input format detection Compatibility with standard VESA mode and support user-defined mode Smart engine for Phase/Image position/Color calibration Scaling Fully programmable zoom ratios Independent Horizontal/Vertical scaling Sharpness/Smooth filter enhancement Other Option: :Audio (1W) x 2 Control
Monitor views 17” LCD Specification: PC RGB Inputs Input signal Input impedance Polarity Amplitude Multi-mode support Analog RGB 0.7Vp-p 75 Ohm ± 2% Positive, Negative 0 ~0.7 ± 0.05Vp Horizontal frequency: 30~80KHz Vertical frequency: 50~75Hz Feeder Input voltage 100~240VAC, 50/60Hz Output voltage +12V DC, 3.33A (40W) / 4.16A (50W) Power On: 50W max. (green LED) Off: 1W max.
Environmental conditions Operational conditions 5◦C to 35◦C Relevant humidity Storage conditions 20% to 85% Temperature -20◦C to 60◦C Relevant humidity 5% to 85% Monitor views 17” LCD Fracarro Radioindustrie S.p.A. - Via Cazzaro n.3 - 31033 Castelfranco Veneto (TV) ITALIA Tel: +39 0423 7361 - Fax: +39 0423 736220 Società soggetta a direzione e coordinamento di CAMI S.r.l. - partita IVA 02399120266 Fracarro France S.A.S.