Manualshelf

Operation Manual

ManualsBrandsFrama ManualsFrankingMATRIX F10
11121314151617181920
Frama Matrix F10 / F12
14
2.4. First use
Insert the power supply unit into a suitable mains socket. You will hear various sounds during the
switch-on routines. All the motors and sensors are being checked.
Information
Information: The switch-on routines may take some time. During this time, the Frama Matrix
F10 / F12 franking system will not accept any input from you.
The franking system must now be installed (registered) with the FramaOnline2 data centre.
2.5. FramaOnline2 installation
Installation on the FramaOnline2 data centre establishes the full functionality of your franking sys-
tem and is indispensable for the correct operation of the system.
Information
Information: It may be necessary to configure your franking system to ensure that it connects
successfully with your network. Follow the instructions on page 44 to make the necessary
settings.
Information
In any event, you will need your PIN for administration mode as well as your FramaOnline2
activation code, which was mailed to you under separate cover. You cannot activate your
system for FramaOnline2 operation without this number. The FramaOnline2 activation code
is used solely for activation. Protect your PINs from misuse by keeping them in a safe place. If
you forget or mislay your codes, they can be read out only in the Frama Central Workshop.
A note on installation appears once the system has been started successfully.
1. Acknowledge the note on installation.
2. Select FramaOnline2.
3. Enter the admin PIN. The default value for this PIN is 1234. Press the OK key.
4. Press the “i“ key at the top right of the screen.
5. Press the Spanner key at the top right of the screen.
6. Press the “arrow” at the top right of the screen.
7. Select FramaOnline2.
8. Press the Activation PIN key and enter the activation PIN.
9. Press “arrow” symbol) in the top right-hand corner. On the FramaOnline2 screen, select the
Installation key. Press the YES key to begin installation.
The franking system contacts FramaOnline2.
Once FramaOnline2 installation is complete, you will be prompted to install the ink jet cassette.