Operation Manual

Frama Matrix F10 / F12
21
4.2.4. Changing the cost centre PIN
The cost centres are protected by a PIN by default. In the as-delivered state of the franking system,
the PIN is the same as the cost centre number. The PIN can have up to 4 digits.
Proceed as follows to change the PIN for the current cost centre:
Press the Change PIN key (in Setup 1).
Enter the old PIN. Press OK to confirm.
Enter the new PIN. Press OK to confirm.
Enter the new PIN again and confirm your input by press-
ing OK.
You have access to all cost centres in Admin mode (see from page 42).
4.2.5. Changing the cost centre name
Your Frama Matrix F10 / F12 franking system offers you the option of assigning an individual name
to each cost centre. It is supplied by default to the Select Cost Centre screen and simplifies your
work.
Press the Change PIN key (in Setup 1).
Select Change CC Name and enter the name of the cost centre using the text input screen.
4.2.6. Deleting counter readings of current cost centre
You can delete the counter readings for the current cost
centre in the Setup 1 menu.
Confirm deletion by pressing ENTER.