Operation Manual

Frama Matrix F10 / F12

4. PIN Code ON/OFF: This is used to activate and deactivate PINs for the cost centres. The PIN

for Admin mode cannot be deactivated. For safety reasons, always leave the PIN activated.

7.4. Setup 4 menu

1. Product reset on log-off (Auto Log off: This setting

defines how the start menu behaves when switching be-

tween cost centres (default = OFF).

Setting ON:

The current mail product is reset and

must be re-entered when the cost centre is

changed.

Setting OFF:

The current product is retained when the cost centre is changed.

2. Logo: Use this setting to define whether all cost centres need to work with the same logo or

whether each cost centre may use an individual logo (default = Logo CC).

Logo SYSTEM:

All cost centres automatically use the logo defined in Admin mode. The Admin

mode has an appropriate function in the Main Menu where you can define the logo.

Logo CC (default):

Each cost centre can use an individual logo. The logo is configured accordingly

each time a cost centre is called up.

7.4.1. Restarting the system

For your changes to become effective, you need to restart your Frama Matrix F10 / F12 franking

system. To do so, use the Start up/Log off function in the Setup 1 menu.