Operation Manual

Frama Matrix F10 / F12

8.2. Counter Readings

You can display the counter readings of each cost centre

shown in Admin mode. You can call up one cost centre or

a list of cost centres for this function.

Select CC:

Press this key to call up the

Select CC menu.

Select the cost centre.

8.3. Setup 1

The Change PINs and Reset Counters functions apply to

all cost centres in the Admin mode and therefore offer

extended options. The Save Start Menu item is not availa-

ble in Admin mode.

8.3.1. Change PINs

Press the Change PINs key to change the PIN for Admin mode (Change PIN) or to modify the PINs

and names for other cost centres (Select CC).

8.3.2. Reset Counters

Press Reset Counters and select the cost centre to be deleted.

The All CCs key deletes all cost centres.

Confirm the security prompts to delete the desired cost centres.

8.3.3. Setup 2/Setup 3 /Setup 4

The settings for Setup 2, 3 and 4 have already been described in detail from page 43.