Instructions / Assembly

Step 5
Once satisfied with the location and shape,
turn stakes over and hammer into the
ground. (Image 5)
Step 6
Cover the top of each stake with enclosed
joint caps. (Image 6)
Step 7
Cover the bottom of the sandbox with the enclosed
liner to contain the sand and discourage weed growth.
Note: If you wish to locate the sandbox on a hard sur-
face such as a patio or deck, use a hacksaw to remove
the pointed end of the stake until the stake is flush
with the lower edge of the timber.
IMPORTANT SAFETY INFORMATION AND PRECAUTIONS
• This product is intended for the enjoyment of children AGES 4 AND OLDER.
• Adult assembly only. Prior to assembly, this package contains a few small parts.
• KEEP UNASSEMBLED PARTS AWAY FROM SMALL CHILDREN UNTIL ASSEMBLED.
• Adult supervision required -- DO NOT LEAVE CHILDREN UNATTENDED IN SANDBOX.
INSPECT THE PRODUCT FREQUENTLY FOR DEGRADATION, LOOSE PARTS, DAMAGE OR SHARP EDGES.
• Continued inspection is critical to ensure safe use of the sandbox. Over time, heat, cold, water or other
environmental factors, heavy use or misuse, or age of the product may cause parts to come loose or
break off or sharp edges to develop.
• For outdoor use only. IF TEMPERATURES ARE BELOW FREEZING, SANDBOX MATERIALS MAY LOSE RESIL-
IENCE AND MAY BECOME BRITTLE AND CRACK UPON IMPACT -- do not use sandbox in cold temperatures
and store it in a warmer environment.
• If you purchased the cover for sandbox, DO NOT ALLOW CHILDREN TO PLAY WITH COVER, OR INSIDE THE
SANDBOX WITH THE COVER ON.
Use only clean play sand and keep sandbox covered when not in use.
Contech Enterprises Inc. 115-19 Dallas Road - Victoria, BC Canada V8V 5A6
www.frameitall.com | 1800.767.8658
Image 5 Image 6