Convection Oven User Manual

Installation instructions

Connection to power mains

FRANKE ovens are equipped with a three pole power cable with free terminals.

If the oven is permanently connected to the power supply, install a device to ensure that it

is disconnected from the power supply, with a contacts opening distance (of at least 3

mm) to ensure total disconnection in conditions of category III overvoltage. Make sure:

a) the plug and socket are suitable for a 16A current

b) both are easily accessible and positioned so that no live part can be accessed when

inserting or removing the plug

c) the plug can be easily inserted

d) when plugged in, the oven doesn't rest against the plug when installed in the cabinet

e) the same socket must not be used for two plugs

f) a 3 x 1.5 mm2 cable

type

H05VV-F should be used to replace

the power cable

g) the polarity of connection of the free terminals must be

respected

(Brown=Phase – Blue=Neutral – YellowGreen=Earth)

N.B: make sure that the characteristics of your power system

(voltage, maximum power and current), are compatible with

those of your FRANKE oven.

Place the appliance in the compartment; secure the oven to the unit with

the 4 screws provided, through the holes in its side panels.

If the oven is to be fitted underneath a cooktop, first turn the cooktop

assembly (R) to the right or left so that the oven fits properly.

BLU

MARRONE

BROWN

BLUE

GIALLO-VERDE

YELLOW-GREEN