Technical data

Warning
These hints have been prepared for your guidance, you must
exercise due care at all times. We do not accept responsibility
for any problems that may occur through incorrect installation.
How to care for your kitchen sink mixer
To maintain the appearance of this fitting, ensure it is cleaned
only using a clean, soft damp cloth. A solution of warm water
and mild liquid detergent may be used where necessary, and
then the fitting rinsed thoroughly. Abrasive cleaners or acidic
cleaners MUST NOT BE USED under any circumstances.
Avoid contact with all solvents.
Technical Data
Minimum water pressure: 7.25 PSI (0.5 bar)
Maximum water pressure: 75 PSI (5 bar)
Maximum hot-water temperature: 70°C
Recommended hot water temperature: 65°C
Note: If these temperatures or water pressures are
exceeded damage to the tap can result.
A pressure reducing valve may be required to be fitted in
high water pressure situations.
NB If for any reason the spout is removed from the tap,
care must be taken when reinserting the spout into the body
to ensure that the Grub Screw is located in the split of the
white PTFE ring.
PARTS LIST AS FOLLOWS:
SPOUT 3577R+COLOUR
PERLATOR 1303R+COLOUR
O-RING KIT 1239R
COLD HANDLE 3035R C
HOT HANDLE 3035R H
COLD VALVE 1427R C
HOT VALVE 1427R H
FIXING KIT 3037R
COPPER TAILS 1234R
FIXING NUT 3596R
1303R
3596R
1239R
3035R
1427R-H
1427R-C
3037R
1234R
3577R