Installation Instructions

TECHNICAL DATA
NOTE:
Call us immediatly if you see inconsistencies.
(1- 800-626-5771)
or visit
www.frankeksd.com
[e-mail]
CONTENTS IN BOX
1 Faucet assembly
2 Rubber washer
3 Rubber washer
4 Plastic ange
5 Fixing plate
6 Fixing nut
12 Supply hoses
13 Key for aerator
INSTALLATION INSTRUCTIONS
1. Remove all contents from the package and check for completeness.
2. Flush pipe work to ensure it is free from debris.
3. Turn o water supply.
4. Remove faucet and hardware from its protective packaging.
Faucet comes assembled.
5. Connect the 2 exible supply hoses (12) - red hot water, blue cold
water - to the body of the faucet (1).
6. Cut a mounting hole 1 3/8 diameter (35mm) in the desired position in
counter top or sink (if one isn’t available).
7. Place the rubber washer (2) over the hole.
ATTENTION: The washer should be sitting between the countertop and
faucet base.
DO NOT use putty or other sealant at this location.
NOTES:
Solid surface installation
: The countertop mounting surface needs to
be at and free of debris otherwise the faucet may not sit properly.
For tile installations, avoid installing faucet near or on top of grout lines.
This may cause a weak joint between the faucet and the counter and
could cause leaks.
8. Install the monting hardware to the base of the faucet body in
the following order - rubber washer (3) plastic ange (4) and xing
plate (5) as ilustrated
9. Tighten the whole with the xing nut (6) on the body (1).
11. Connect the exible supply hoses (12) to the water supply in the
house and turn on the faucet. Ensure everything is functioning properly
and check/ test for leak.
1
5
6
13
Flow Rate
Recommended Water Pressure
Max. Water Pressure
Recommended Hot Water Temp.
Hole Size For Faucet
Certies this faucet complies with ASME A112.18.1 / CSA B125.1
& NSF 61, NSF 372 and AB1953
1.75 GPM at 45 PSI
30-75 PSI
145 PSI
120°-140° F
1 3/8”
2
5
10
1
7
12
4
3
6
11
10
11
9
8
10. Connect the nipple (8) to the exible (7), connect the exible (9) to
the nipple (8) and place the load weight (10) on the exible (9) with the
screw (11).
2
4
3
8
10
7
9
11
7 Flexible
8 Nipple
12
9 Flexible
Weights
Screws
10
11