Specifications Sheet

PLEASE NOTE
Large and heavy taps should ideally be mounted directly through the solid benchtop or fully supported from underneath. For all other swivel taps, we recommend
the use of the Franke Tap Support Arm to provide additional support. Please ensure all Franke tapware is installed at a pressure of no greater than 500 kPa in
accordance with AS/NZS3500 and insist that your plumber flushes all of the water supply lines before installing tapware.
Failure to do so may void warranty.
LAST UPDATED: 15 SEP 2017
TECHNICAL DATASHEET
ATLAS TA 9521
Product Category
Taps
Finish
Stainless Steel
Range
Atlas
Model
TA 9521
Warranty
15 Years
PRODUCT INFORMATION
Article Number
115.0517.598
Style
Pull-out
Cut-Out Size
∅ 35mm
WELS
4 star / 7.5 Lpm
Min. (PSI)
7.25
Max. (PSI)
72.5
Min. (kPa)
50kPa
Max. (kPa)
500kPa