Installation guide

Connecting drain
The Quooker tank releases expansion water via the inlet combination during
heating, this water is being fed into the grey funnel. The funnel can easily be
connected to the drain by means of the drain hose supplied. The drilling kit also
supplied can be used to make a connection to the drain pipe.
Try to keep the difference in height between the inlet combination and the
connection to the drain as large as possible, to keep the drain water from
flowing back.
1 2
3 4
1 Drilling hole
Using the drill bit supplied, drill and
tap in one operation a threaded hole
in the grey PVC drain pipe. Drill slowly
so that the PVC does not melt.
Turn back anticlockwise to preserve
the thread.
2 Screwing in
nipple
First try to screw the nipple in the
hole before fitting permanently with
PVC glue.
3 Hose to drain
Slide the drain hose over the PVC
nipple.
4 Hose on inlet
combination
Connect the other side of the hose
with a suspended bend to the funnel
of the inlet combination. This will
create a water lock to prevent smells
from the drain pipe.
D