Technical data

PARTS LIST AS FOLLOWS:
133.0069.255 SPOUT CHROME 1499R CH
133.0069.265 SPOUT SILKSTEEL 1499R SS
133.0069.256 SWIVEL & AERATOR CHROME
COMPLETE
1498R CH
133.0069.266 SWIVEL & AERATOR SILKSTEEL
COMPLETE
1498R SS
133.0085.007 FIXING NUT CHROME 1243R CH
133.0150.095 FIXING NUT SILKSTEEL 1243R SS
133.0069.151 O-RING KIT 1239R
133.0069.381 VALVE COVER CHROME 3412R CH
133.0069.385 VALVE COVER SILKSTEEL 3412R SS
133.0255.893 HOT HANDLE CHROME 1955R- H CH
133.0255.894 COLD HANDLE CHROME 1955R- C CH
133.0255.895 HOT HANDLE SILKSTEEL 1955R- H SS
133.0255.896 COLD HANDLE SILKSTEEL 1955R- C SS
133.0255.897 COMPRESSION VALVE 3768R
133.0069.184 SET OF COPPER TAILS 1234R
133.0068.819 FIXING KIT 1492R
Warning
These hints have been prepared for your guidance, you must
exercise due care at all times. We do not accept responsibility
for any problems that may occur through incorrect installation.
How to care for your kitchen sink mixer
To maintain the appearance of this fitting, ensure it is cleaned
only using a clean, soft damp cloth. A solution of warm water
and mild liquid detergent may be used where necessary, and
then the fitting rinsed thoroughly. Abrasive cleaners or acidic
cleaners MUST NOT BE USED under any circumstances.
Avoid contact with all solvents.
Technical Data
Minimum water pressure: 7.25 PSI (0.5 bar)
Maximum water pressure: 75 PSI (5 bar)
Maximum hot-water temperature: 70°C
Recommended hot water temperature: 65°C
Note: If these temperatures or water pressures are
exceeded damage to the tap can result.
A pressure reducing valve may be required to be fitted in
high water pressure situations.
NB If for any reason the spout is removed from the tap, care
must be taken when reinserting the spout into the body to
ensure that the Grub Screw is located in the split of the
white PTFE ring.