Specifications Sheet

FRANKE TAPS
PLEASE NOTE: Large and heavy taps should ideally be mounted directly through the solid benchtop or fully supported from underneath.
For all other swivel taps, we recommend the use of the Franke Tap Support Arm to provide additional support. Please ensure all Franke tapware
is installed at a pressure of no greater than 500 kPa in accordance with AS/NZS3500 and insist that your plumber flushes all of the water supply
lines before installing tapware. Failure to do so may void warranty.
FRANKE
IS SWISS
LAST UPDATED: 20 NOV 2019
PRODUCT INFORMATION
Article Number
115.0538.272
Style
Non Pull-Out
Tap Swivel Spout (degrees)
360˚
Cut-Out Size
∅ 35mm
WELS
4 star/7.5 Lpm
Reg No: T31536
Min. (PSI)
7.25
Max. (PSI)
72.5
Min. (kPa)
50kPa
Max. (kPa)
500kPa
Finish
Chrome
Warranty
5 years parts and labour
15 years cartridge
*T&C’s apply
TA 6850
OZONE TAP