Specifications Sheet

FRANKE
IS SWISS
FRANKE TAPS
PLEASE NOTE: Large and heavy taps should ideally be mounted directly through the solid benchtop or fully supported from underneath.
For all other swivel taps, we recommend the use of the Franke Tap Support Arm to provide additional support. Please ensure all Franke tapware
is installed at a pressure of no greater than 500 kPa in accordance with AS/NZS3500 and insist that your plumber flushes all of the water supply
lines before installing tapware. Failure to do so may void warranty.
Open
25°
M34X1.5
Hot
Cold
50Max
Ø35
6°
45°
45°
Ø45
297
225
269
R50
(85)
Ø25
180°
PRODUCT INFORMATION
Style
Non Pull-Out
Tap Swivel Spout (degrees)
180˚
Cut-Out Size
∅ 35mm
WELS
Min. (PSI)
7.25
Max. (PSI)
72.5
Min. (kPa)
50kPa
Max. (kPa)
500kPa
Finish
Black Steel
Warranty
5 years parts and labour
15 years cartridge only
*T&C’s apply
TA9700BS
ATLAS NEO
LAST UPDATED: 21 SEP 2020