How-To Guide

1
4
Use waterproof Aviation socket, safe and secure
5
6
word
Press the button for 5 seconds,move
your finger and wait a few seconds
till the LED light turn to blue flicker.
Then ”CONFIRM ” to next step.
8
9
Ensure the water valve blue light in quickly flash, then
press”More device reset methods”
12
14
5
15
16
Countdown Function
17
APP Cloud Timing Function
(Schedule function)
Set Start or End Time
Set Valve Position according
to your needs
18
Model No.: FK-V02
Support Ambient Temperature:-30℃~60℃
Input Voltage: DC5V
Max pressure: 1.0Mpa
Materials: SS304 & Engineering Plastics
Valve Size: DN15,DN20,DN25,DN32
Screw Thread: NPT BSP
Frequency of Timing:
Unlimited times per day, the interval between
the maximum period is once a week.
App manual control, Field manual operation,
APP cloud timing, Countdown
Controller Operation:
3
24
25
26
Smart lifeSmart life
2
Power Failure Protection Function：
If the power is cut off suddenly, the water valve
will automatically close within 2 seconds
19
Automation Funcation
How to use automation funcation with smart water
leak sensor:
(Kindly notice: make sure your water sensor in same
protocol as water valve. Zigbee water valve request
Tuya zigbee water sensor, and our wifi water valve
request Tuya wifi water sensor! )
21
23
Choose “Others(Zig-
bee)” from “Other”
area
Enter the App and
press “+” at upper
right corner to add
gateway
10
for Zigbee version water valve
(Ensure you have zigbee gateway together, which requested to use together
with our water valve)
20
Step 1: Make sure
you already paired the
water sensor and
water valve in same
app successfully.
Step 2: Press “ smart”
then in “Automation”
page. Then press “+” at
upper right corner to
create a task
Step 3：Set a condition on water leak sensor
Step 4: Set up task for water valve, then you can see
the task details, and water valve will do action
automatically.
22
Press” Add Manually”
–“Gateway and
others” –“Connector(-
Wi-Fi) ” to add a new
item.
7
For WiFi type water valve
After gateway paring
done, enter into the
main page of Gateway,
continue to add the
water valve from “Add
Subdevice”
Paring with gateway
when the red led light
in quickly flash
11
4
Press “Others” and start to pair, until you see the
water valve on your reparing page, then its done.
13
6