Dimensions Guide

ManualsBrandsFranklin Brass ManualsBath72 in. x 1 in. Stainless Steel Shower Rod in Bright Stainless Steel

Shower Rods

MATERIALS: 176 tubing is 1" O.D. X .015 (28 gauge) type 430 polished stainless steel.

177 tubing is 1" O.D. x .015 (28 gauge) bright aluminum. Flanges for 176

and 177 are galvanized steel hanger type with concealed screw type 430

polished stainless steel covers. Holders for 176H and 177H are chrome

plated zinc die cast (Zamak) adjustable tension mount type with rubber discs.

Holders for 176HP and 177HP are chrome plated ABS plastic adjustable

tension mount type with rubber discs.

INSTALLATION: Install hanger type flanges and rod with 4 - #8 X 1-1/4" round head zinc plated

steel screws provided. Cover flanges to be on rod before installation of

hangers and rod. Slide cover flanges over hangers to complete installation.

Install adjustable tension mounted holders and rod by sizing rod 1-5/8" shorter

than wall opening. Insert rod into holders and tighten into position with

counterclockwise motion on threaded holder until secure.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces where screw-in installation

is used (176, 177). If wood blocking is not available, the following fasteners are

suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Surface mounted shower rod shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

SHOWER ROD - 176 & 177 SERIES

TECHNICAL DATA

5', 6'

177HP

177H

177

176HP

176H

176

DIM "A"MODEL#

1-3/4"

44 mm

"A"

2-3/8"

60.3 mm

3/4"

19 mm

2-1/2"

64 mm

1/2"

13 mm

1-3/4"

44 mm

1-3/4"

44 mm

1-3/4"

44 mm

5/8"

16 mm

1" O.D.

25 mm

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com