Specification Sheet

Curved Shower Rods
211 SERIES
TECHNICAL DATA
60"
1524.0 mm
6"
152.4 mm
2-3/16"
56.0 mm
MATERIALS: Tubing is 1" Oval x .028 (22 gauge) Type 304 stainless steel. Spring pins are solid brass. Brackets and Flanges are zinc die cast.
INSTALLATION: Mount wall brackets using supplied fasteners, recommended location is 3” back from edge of tub or shower unit. Note the markings
on brackets for stationary and adjustable attachment. Depress pins on stationary end of rod and clip into bracket. Repeat step for
adjustable rod end. Slide flanges over brackets. Wood blocking is preferable behind all wall surfaces. If wood blocking is not
available, use anchors or plugs provided with screws.
SPECIFICATION: Curved shower rod shall be model ____________________________ (fill in model number)
by Liberty Hardware Manufacturing Corporation.
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2011 LHMC, A Masco Company
2-11/16"
68.75 mm
"TOOL FREE ADJUSTMENT"
NO CUTTING REQUIRED FOR THE
FOLLOWING FINISHED OPENINGS
5’ ROD ADJUSTMENTS = (4’11” – 5’1”)
6’ ROD ADJUSTMENTS = (5’11” – 6’1”)