Specification

TECHNICAL DATA
Towel Shelves
MATERIALS: Wall Flange - 17 Gauge Stamped Brass
Shelf Tubing - .035 (20 Gauge) 3/4" O.D. Brass Tubing
Towel Bar Tubing - .035 (20 Gauge) 3/4" O.D. Brass Tubing
Crossbars - .025 (23 Gauge) 3/8" O.D. Brass Tubing
INSTALLATION: Mount wall flanges (set screw holes facing down) through holes in projecting fittings
with 4 - #10 x 1-1/2" oval head nickel plated steel screws provided or 4 - 3/16 x 3" zinc
plated steel toggle bolts provided. Wall flange screw holes are vertically 4-7/8" center
to center and horizontally 18" or 24" center to center. Mount top shelf first and then
bottom bar with 4 - 1/4-20 x 5/8" slotted nickel plated steel set screws.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted towel shelf with 1 bar shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
TOWEL SHELF WITH 1 BAR
2787 & 2788 SERIES
Towel Shelves
MATERIALS: Wall Flange- 17 Gauge Stamped Brass
Shelf Tubing - .035 (20 Gauge) 3/4" O.D. Brass Tubing
Towel Bar Tubing - .035 (20 Gauge) 3/4" O.D. Brass Tubing
Crossbars - .025 (23 Gauge) 3/8" O.D. Brass Tubing
INSTALLATION: Install top shelf, middle towel bar and bottom towel bar on wall flanges with 6 - 1-1/4"
machine screws through lock washers and support plates. Mount assembled towel
shelf with 2 bars with 4 - #9 x 1-1/2" flat head nickel plated steel screws provided or
4 - 3/16 x 3" zinc plated steel toggle bolts provided.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted towel shelf with 2 bars shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
TOWEL SHELF WITH 2 BARS
2783
(664 mm)
(610 mm)
(511 mm)
(457 mm)
(610 mm)(457 mm)
26-1/8"
24"
24"
20-1/8"
DIM "B"
18"DIM "A"
18"LENGTH
2-1/8"
54 mm
9-7/8"
251 mm
5-7/8"
149 mm
4"
102 mm
1-3/4"
44 mm
1-3/4"
44 mm
8-1/2"
216 mm
6-3/8"
162 mm
"A"
"B"
2-1/8"
54 mm
5-7/8"
149 mm
9-7/8"
251 mm
4-1/8"
105 mm
8-1/2"
216 mm
4-7/8"
124 mm
"A"
"B"
(664 mm)
(610 mm)
(511 mm)
(457 mm)
(610 mm)(457 mm)
26-1/8"
24"
24"
20-1/8"
DIM "B"
18"DIM "A"
18"LENGTH
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2009 LHMC, A Masco Company