Specification Sheet

Tempra

MATERIALS: Wall Flange and Projecting Posts - Stamped Brass

Roller - .015 Stamped Brass, Spring Actuated

Wall Plate - 1/8" Thick Die Cast Zinc with 1" Diameter Projecting Stud

INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied

fasteners. Slip product over wall plate(s) and tighten set screws until secure.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces. If wood blocking is not

available, the following fasteners are suggested: Tile/Masonry - Plastic or

Lead Anchors, Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Surface mounted toilet paper holder shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

TOILET PAPER HOLDER

TECHNICAL DATA

Tempra

MATERIALS: Wall Flange and Projecting Post - Stamped Brass

Ring - 3/8" Diameter .025 Brass Tubing

Wall Plate - 1/8" Thick Die Cast Zinc with 1" Diameter Projecting Stud

INSTALLATION: Mount wall plate bracket(s) per installation instructions with supplied

fasteners. Slip product over wall plate(s) and tighten set screws until secure.

OPTIONAL FASTENER INFORMATION:

Wood blocking is preferable behind all wall surfaces. If wood blocking is not

available, the following fasteners are suggested: Tile/Masonry - Plastic or

Lead Anchors, Plaster/Drywall - Toggle Bolts.

SPECIFICATION: Surface mounted towel ring shall be model ____________________________

(fill in model number) by Liberty Hardware Manufacturing Corporation.

TOWEL RING

2-1/2"

64 mm

3-5/8"

92 mm

9 1/8"

[231 mm]

6-5/8"

168 mm

178 mm

6-1/8"

155.5 mm

2-1/2"

64 mm

1-7/8"

48 mm

Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com