Specification Sheet

Mount wall plate on wall surface in vertical position with 2- #8 x 1 1/4" roundhead zinc plated steel screws provided.
Slip wall flange/ projecting post/ hook assembly over wall plate and tighten set screw until secure. Wood blocking is
preferable behind all wall surfaces. If wood blocking is not available, the following optional fasteners are suggested:
Tile/Masonry - Plastic or lead anchors
Plaster/Drywall - Toggle bolts
SPECIFICATION:
INSTALLATION:
MATERIALS:
Surface mounted robe hook shall be model (fill in model number)
by Liberty Hardware Manufacturing Corporation.
Inner Wall Flange - 16 gauge type 304 stainless steel
Cover Wall Flange - 22 gauge type 304 stainless steel
Projecting Post - 22 gauge type 304 stainless steel
Hook - 12 gauge type 304 stainless steel
All components welded construction with concealed screw attachment on 16 gauge stainless steel wall plate.
2"
[51 mm]
1 1/8"
[29 mm]
4"
[102 mm]
2"
[51 mm]
1/2"
[13 mm]
2 1/4"
[57 mm]
1/2"
[13 mm]
2 1/4"
[57 mm]
1"
[25 mm]
2"
[51 mm]
1 7/8"
[48 mm]
2"
[51 mm]
CENTURY
Single & Double Robe Hooks
TECHNICAL DATA
140 Business Park Drive • Winston-Salem, NC 27107
800.542.3789 • T 336.769.4077 • F 336.769.1839
www.libertyhardware.com
Updated October 2006