Installation Guide

CONCEALED SCREW INSTALLATION INSTRUCTIONS
For Towel Bar and Paper Holder Items
1. Mount plates on wall as shown in Fig. B with center to center distances as follows: Paper Holder – 5 ¾" c-c,
18" Bar – 17 ¾" c-c, 24" Bar – 23 ¾" c-c, 30" Bar – 29 ¾" c-c, 36" Bar – 35 ¾" c-c
2. Mount left hand post on wall plate by slipping notched section of post over top lip of wall plate. Tighten set screw.
3. For Towel Bar: Insert bar; mount right hand post on wall plate as in step 2.
4. For Paper Holder: Mount right hand post as in step 2. Insert roller.
For Shelf Items: (F1460, F1465, 1470, F1475)
1. Follow mounting instructions shown above.
2. Center to center distances as follows:
18" Shelf mount wall plates 17 – ¾" c-c
24" Shelf mount wall plates 23 – ¾" c-c
For Other Projecting Items
1. Mount Plate on wall as shown in Fig. A
2. Mount projecting part on wall plate by slipping notched section of part over top lip of wall plate.
3. Tighten set screw.
CP2460-XXX
Fig. A
Fig. B
For 18" Bar
17 ¾" to Center to Center