Specifications Sheet

Towel Shelf
MATERIALS: Inner Wall Flange - 16 gauge type 304 stainless steel
Cover Wall Flange - 22 gauge type 304 stainless steel
Projecting Post - 22 gauge type 304 stainless steel
Cross Bar - 5/16" square .015 (28 gauge) type 430 stainless steel
Towel Bar - 5/16" square .015 (28 gauge) type 430 stainless steel
Towel Bar Post - 22 gauge type 304 stainless steel
All components welded construction with concealed screw attachment on
16 gauge stainless steel wall plate.
INSTALLATION: Mount wall plates at 17 3/4" C-C for 18" shelf, 23 3/4" C-C for 24" shelf on wall surface in vertical position with 4- #8 x 1 1/4"
roundhead zinc plated steel screws provided, or 4- #6/32 x 2" zinc plated steel toggle bolts provided.
Slip pre-assembled towel
shelf with bar over wall plates and tighten set screws until secure. Wood blocking is
preferable behind all wall surfaces. If wood
blocking is not available, the following optional fasteners are suggested:
Tile/Masonry - Plastic or lead anchors
Plaster/Drywall - Toggle bolts
SPECIFICATION: Surface mounted towel shelf with bar shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
CENTURY TOWEL SHELF WITH BAR
TECHNICAL DATA
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2011 LHMC, A Masco Company
(654 mm)
(603 mm)
(502 mm)
(451 mm)
(610 mm)(457 mm)
25-3/4"
23-3/4"
24"
19-3/4"
DIM "B"
17-3/4"DIM "A"
18"LENGTH
2"
51 mm
2"
51 mm
"A"
"B"
1 3/4"
44 mm
6"
152mm
1/2"
13 mm
8 7/8"
225 mm