Instructions / Assembly

ManualsBrandsFranklin Brass ManualsBath34 in. x 63-1/2 in. Framed Pivot Shower Door in Chrome with Rain Glass

DEC 2015CP12047

Framed

Pivoting

Shower Door Kit

For easy installation of your unit you will need to:

• READ ALL the instructions completely before beginning.

• READ ALL warnings, care, and maintenance information.

• Purchase the correct water supply components.

Consult your local plumbing codes prior to installation.

Distributed by:

Liberty Hardware Manufacturing Corporation

140 Business Park Drive

Winston-Salem, NC 27107

Made in China

For More Information Call: 1.800.964.4850

INSTALLATION GUIDE

Summary of content (8 pages)

PAGE 1
Framed Pivoting Shower Door Kit INSTALLATION GUIDE Consult your local plumbing codes prior to installation. For easy installation of your unit you will need to: • READ ALL the instructions completely before beginning. • READ ALL warnings, care, and maintenance information. • Purchase the correct water supply components. Distributed by: Liberty Hardware Manufacturing Corporation 140 Business Park Drive Winston-Salem, NC 27107 ©2015 LHMC, A Masco Company Made in China For More Information Call: 1.800.964.
PAGE 2
BEFORE YOU START CAUTION: Risk of injury. DO NOT attempt to cut tempered glass. CAUTION: Use work gloves to protect against sharp edges and corners. CAUTION: DO NOT set the glass panel on concrete or other hard surface. CAUTION: Open toe shoes like sandals or flip flops should not be worn when installing tub or shower doors. NOTE: • Shower opening dimensions: Due to variability of enclosures and wall construction, exact width dimensions may vary. – 32" Pivot door: 30-1/8" minimum to 32-1/8" maximum.
PAGE 3
Illustrated Parts Breakdown 23 23 19 6 13 17 20 18 19 20 (For shower head nozzle on left) 24 16 15 24 24 2 10 9 22 18 18 22 19 19 18 7 20 18 1 25 11 19 3 5 4 6 15 12 16 17 19 18 14 NO.
PAGE 4
In this instruction booklet we will walk you through the installation of your new shower door. (#16) 2 Spanner Washer DO NOT REMOVE your old shower door until you check your new shower door kit for all the proper parts. Make sure that you have all the proper tools required to assemble your new shower door. Use this check list.
PAGE 5
B. Locate the Adjustable Pivot Jamb (#1), the Adjustable Pivot Jamb Brackets (#2) and six #8 x 1/2” FH SMS Screws (#24). C. Secure the Adjustable Pivot Jamb Brackets (#2) to the Adjustable Pivot Jamb (#1) with the #8 x 1/2” FH SMS Screws (#24). Tighten the bottom three screws completely. Tighten the top three screws only half way. D. E. F. G.
PAGE 6
STEP 6 Installing the Pivot Pin Assemblies A. B. Locate the Pivot Pins (#15), Spanner Washers (#16), Kep Nuts (#17) and Pivot Bushing (Top) (#13). D. 13 17 16 15 Loosely assemble the two Pivot Assemblies: Pivot Pin (#15), Spanner Washer (#16) and Kep Nut (#17). 15 Place the square head of a Pivot Pin 16 (#15) into each 17 pivot slot of the Door Top and Figure 4 Bottom Rails (#6) on the door panel.
PAGE 7
STEP 9 A. B. Installing the Handles STEP 11 Silicone Sealing the Enclosure Locate the Handle Outside (#9), Handle Inside (with Holes) (#10). A. Use the M5 x 35mm Screws (#22) to attach the Handles to the Pivot Strike Rail (#5). Screw heads should be inside the shower. NOTE: Silicone sealant must cure for 24 hours before you use your new enclosure. Silicones may vary. Please follow manufacturer's instructions for safety, cleaning and disposal recommendations. STEP 10 Installing the Dam Strip A.
PAGE 8